How To
Design Your Own Custom Multi-Mounts

If you can't find a standard multi-mount design that fits your requirements you can create one based on your own custom drawings. Simply provide a rough diagram which indicates how you'd like the mount to be laid out, along with a few measurements. This page details how to do that.

Measure the distance between the opening and the outer edge of the mount
Fig.1 - Measuring a bespoke multi-opening photo mount

What To Do

Bespoke multi-opening mounts can be configured to display up to 50 pictures in a single frame. Each opening can be made to a different size and there's almost no restriction in terms of layout design. By designing your own mount, there's no need to compromise. You don't need to needlessly trim your pictures and you can frame all your favourite photos without leaving any out.

  1. Outer dimensions - if your mount is fitting into a frame that you already have, please provide the external dimensions of the mount. These dimensions should be identical to your existing glazing or backing board dimensions
  2. Openings - the exact dimensions of each opening. These are the window cut-outs that your picture will be mounted behind. The height and width of these openings should be provided. Remember, the size you give us is the size that will be cut, so make sure that the height and width you provide are slightly smaller than the picture or it will fall through the aperture! See Fig. 1 (A)
  3. Borders - the distance between the opening and the mount edge. See Fig. 1 (B)
  4. Gaps between openings - the distance between each opening. Please note that the minimum distance permitted between the openings is 15mm. See Fig. 1 (C)

Customer Example

Here's a great example of what's needed in order to create your dream made to order multi-picture mount.

Example of customer supplied mount diagram with several openings for photos